Filter
Top Products
8
8. Inse rt the line into the exit hole in the hub
as shown in the illust ration.
9. Align the notch with the line exit hole.
10. Push the spool into the hub until it snaps
into place.
11. Pull on the line extending outside the hub
to release it from thenotch ;otherwise, the
unit will not function properly .
Small
Hole
Spool
Tap
Button
Hub
Line exit hole
L
ine in Notch
USER REPLACEABLE SERVICE PARTS
Spool with 0.065″ Trimmer Line 952701663
Assist Handle 530403805
Bolt Carriage, 1/4-20 530403886
Wing Nut 530016152
Shield Assembly 530404076
Edge Guide 530403845
REPLACEMENT PART PART NUMBER
STORAGE
WARNING: Perform the following
steps after each use .
S Stop the unit and disconnect the power
source when not in use.
S Carry the unit with motor stopped.
S Store the unit so the line limiter blade can-
not cause injury.
S Store unit and extension cord indoors in a
high, dry place out of the reach of children.
Store unit unplugged.
S Store unit with all guards in place. Position
unit so that any sharp object cannot acci-
dentally cause injury.