Filter
Top Products
5
3. Inse rt the shield onto the motor housing.
Ensure the cutting head remains free to
rotate and the line is not caught between
the shield and the motor housing.
4. T wist the s hieldas illustrated untilit snaps
securely into place. Make sure theshield
is assem bled to the unit as shown in the
following illustration and in the KNOW
YOUR UNIT section of this manual.
CAUTION: Sharp line limiter blade
A
LIGN INSTALL
A
TION
A
RROWS
Twist shield
in direction of
arrow to
asse mble
OPERATION
KNOW YOUR UNIT
READ THIS INSTRUCTION MANUAL A ND SAFETYRULESBEFORE OPERATING Y OUR U NIT.
Compare the illustrations wi th your unit to familiari ze yourself with the location of the various controls
and adjustments. Save this manual for futur e reference.
Recessed
Plug
Trigger Switch
Cord
Retainer
Air
Vents
Debris Shield
Line Limiter Blade
Motor Housing
Trimmer Head
with 0.065 in.
Trimmer Line
Assist
Handle
Tap Button
Locking
Sleeve
Assembly
Edge Guide
Twist and Edge Button
RECESSED PLUG
The RECESSED PLUG is where you attach
your extension cord to the unit.
TRIGGER SWITCH
TheTRIGGERSWITCHisusedtoturnonthe
unit.Squeezethetriggerswitchtooperatethe
unit. Release to stop.
LINE LIMITER BLADE
The LINE LIMITER BLADE cuts the cutting
line to the proper cutting length.
ASSIST HANDLE
The ASSIST HANDLE is used to help hold
and guide the unit.
TRIMMER HEAD
The TRIMMER HEAD holds cutting line and
rotates during operation.
TAP BUTTON
The TAP BUTTON is used to advance the
cutting line during operat ion and to remove
the sp ool during line replacement.
TWIST AND EDGE BUTTON
The TWIST AND EDGE BUTTON is used to
twist t he lower portion of the unit into an edg-
ing position .
EDGE GUIDE
The EDGEGUID Eprotect s theunitfr omcon-
tacting the ground during edging.