Tripp Lite 200812163 Portable Generator User Manual


  Open as PDF
of 12
 
3
Feature Identification
Identifythepremiumfeaturesonyourspecificmodelandquicklylocateinstructionsonhowtomaximizetheiruse.
Configuration DIP Switches: optimize Inverter/Charger
operation depending on your application. See Configuration
section for setting instructions.
Operating Mode Switch: controls Inverter/Charger operation.
The"AUTO/REMOTE"settingensuresyourequipmentreceives
constant, uninterrupted AC power. It also enables the Inverter/
Charger to be remotely monitored and controlled with an
optional remote module (Tripp Lite model APSRM4, sold sepa-
rately).The"CHARGEONLY"settingallowsyourbatteriesto
return to full charge faster by turning the inverter off which halts
batterydischarging.The"DCOFF"settingde-energizestheunit
andconnectsACOUTtoACIN.SeeOperationsectionforset-
ting instructions.
"LINE", "INVERT", "LOAD" LEDs: show whether the
Inverter/ChargerisoperatingfromAClinepowerorDCbattery
power. It also warns you if the connected equipment load is too
high. See Operation section for instructions on reading the indi-
cator lights.
"BATT VOLTAGE" LEDs: thesethreelights will turnONin
severalsequencestoshowapproximatebatterylevel.SeeOperation
section for instructions on reading the indicator lights.
DC Power Terminals: connect to your battery terminals. See
Battery Connection section for instructions.
AC Output Receptacles
AC Input Receptacle (230V Models): attach input cord to con-
nect the Inverter/Charger to any source of utility- or generator-
supplied AC power. The user must provide an appropriate
country-specificinput cable for230VModels. SeeACInput/
Output Connection section for instructions.
AC Input Cord (120V Models): plug the Inverter/Charger into
a utility- or generator-supplied AC power outlet.
Resettable Circuit Breakers: protect your Inverter/Charger against
damage due to overload or charger failure. See Operation sec-
tion for resetting instructions.
Remote Control Module Connector: allows remote monitoring
and control with an optional module (Tripp Lite model APSRM4,
soldseparately). Seeremotemoduleowner’smanualforcon-
nection instructions.
Main Ground Lug: properly grounds the Inverter/Charger to
vehicle grounding system or to earth ground. See Configuration
section for instructions.
Cooling Fan: quiet, efficient fan prolongs equipment service life.
1
2
3
4
5
6
7B
7A
8
9
10
11
Front View (230V Non-Corded Models) Front View (120V Corded Models)
1
2
4
3
9
10
6
5
11
1 24 3
5
6
8
9
11
10
7B
7A
8
 previous next