Filter
Top Products
Safety and Instructional Decals
Important: Safety and instruction decals are located near areas of potential danger. Replace damaged
decals.
117-6047
1. Cutting dismemberment, impeller and cutting
dismemberment, auger hazards—do not place your hand in
the chute; remove the ignition key and read the instructions
before servicing or performing maintenance.
120-0149
1. Primer 4. Pull key to switch engine
switch Off.
2. Push the primer two times
to prime the engine.
5. Remove key to lock
machine.
3. Push key in to switch
engine On.
6. Read the Operator’s
Manual before checking
engine oil level.
117-7713
1. Warning—read the Operator's Manual. 4. Fuel spill hazard—do not tip machine forward or backward.
2. Cutting/dismemberment hazard, impeller—stop the engine
before leaving the machine.
5. To engage the auger, squeeze the control bar.
3. Thrown object hazard—keep bystanders a safe distance from
the machine.
6. Release the control bar to disengage the auger.
4