Filter
Top Products
Figure 24
1. Trigger
2. Chute deector
Clearing a Clogged Discharge
Chute
Important: Hand contact with the rotating rotor
blades inside the discharge chute is the most
common cause of injury associated with machine.
Never use your hand to clean out the discharge
chute.
To clear the chute:
• Shut the engine off !
• Wait 10 seconds to be sure the rotor blades have
stopped rotating.
• Always use a clean-out tool, not your hands.
Self-propelling the
Snowthrower
Lift the machine handle until the wheels are just off
the ground and the scraper and rotor blades touch the
ground, The machine will propel forward (
Figure 25).
Figure 25
1. Wheels off the ground 2. Scraper and rotor blades
in contract with the ground
Note: By slightly varying lifting force on the handle, you
can control the forward speed of the machine. In heavy
snow, push forward on the handle, if necessary, but let
the machine work at its own pace. Do not lift the handle
any more than necessary, because the scraper will lift off
the ground and snow will escape behind the machine.
Preventing Freeze-up after Use
• Let the engine run for a few minutes to prevent
moving parts from freezing. Stop the engine, wait
for all moving parts to stop, and remove ice and
snow from the machine.
• Clean off any snow and ice from the base of the
chute.
• Rotate the discharge chute left and right to free it
from any ice buildup.
• With the ignition key in the Off position, pull the
recoil starter handle several times or connect the
electrical cord to a power source and the machine
and push the electric start button once (model 38282
only) to prevent the recoil starter and/or the electric
starter from freezing up.
• In snowy and cold conditions, some controls and
moving parts may freeze. Do not use excessive force
when trying to operate frozen controls. If you have
difculty operating any control or part, start the
engine and let it run for a few minutes.
Operating Tips
WARNING
The rotor blades can throw stones, toys, and other
foreign objects and cause serious personal injury to
the operator or to bystanders.
• Keep the area to be cleared free of all objects
that the rotor blades could pick up and throw.
• Keep all children and pets away from the area
of operation.
• Remove the snow as soon as possible after it falls.
• Overlap each swath to ensure complete snow
removal.
• Discharge the snow downwind whenever possible.
13