Filter
Top Products
Engaging the Rotor Blades
To engage the rotor blades, hold the control bar against
the handle (Figure 20).
Figure 20
1. Control bar
Disengaging the Rotor Blades
To disengage the rotor blades, release the control bar
(Figure 21).
Figure 21
Stopping the Engine
To stop the engine, pull the ignition key outward until
it clicks into the Off position (Figure 22) or move the
choke lever fully to the right (Figure 16).
Figure 22
1. Ignition key
Adjusting the Discharge Chute
and Chute Deector
To adjust the discharge chute, move the chute handle as
shown in Figure 23.
Figure 23
1. Chute handle
To raise or lower the angle of the chute deector, press
the trigger on the chute deector and move the chute
deector up or down (Figure 24). Release the trigger to
lock the chute deector in place.
12