Filter
Top Products
7
the handle socket, insert the enlarged prong into the wide
slot in the extension cord end. Refer to Important Safety
Instructions on page 3 for additional information.
1540
1
Figure 8
1. Enlarged prong
Operation
Check the condition of the snowthrower before operating
it. Ensure that the rotor turns freely.
Starting and Stopping
1. To start the rotor, squeeze the control bar (Fig. 9).
1535
1
Figure 9
1. Control bar
2. To stop the rotor, release the control bar.
Operating Tips
If snowthrower hits a foreign object while in
operation, the object could be thrown in
operator’s or bystander’s direction. Thrown
objects could cause serious personal injury.
Keep the area to be cleared free of all foreign
objects which may be picked up and thrown by
the rotor blades.
Warning
• Always keep children and pets away from the area of
operation.
• Keep the area to be cleared free of stones, toys, or
other foreign objects which the rotor blades can throw.
Such items could be covered by snowfall and go
unnoticed. If the snowthrower strikes an obstruction or
a foreign object during operation, stop the
snowthrower, unplug the extension cord, remove the
obstruction, and check the snowthrower for damage.
• To adjust the discharge chute, rotate the chute crank
clockwise to move the discharge chute to the left;
counterclockwise to move the chute to the right.
Note: The chute crank makes a noise as you turn the
crank. This is normal.
The deflector handle on top of the discharge chute
controls the height of the snow stream (Fig. 10).
Adjust the height of the snow stream by raising or
lowering the chute deflector.
1
1516
Figure 10
1. Chute deflector handle