Toro 36 Sprinkler User Manual


 
Chapter 3
Set Program Schedule
1. Turn the Function dial SCHEDULE to view the following
display:
Program A is selected by default. The current watering day
schedule, start time and water window information is shown
for Program A.
SELECT PROGRAM
A (Optm S12:00am W16:00)
17
Select Program
2. To change the program selection, turn the Lower Line knob to
select program B, C or D.
Note: The abbreviated display information indicates the following:
Optm = Watering day schedule is Optimized by WeatherTRAK
S12:00am = Start Time is 12:00 a.m.
W16:00 = Water window duration is 16 hours.
Important: When the STACK option is selected within the
Setup menu, the start time and water window parameters
defined for Program A will apply to all progams, and can not
be edited by individual program.
If the OVERLAP option is selected, separate start time and
water window parameters can be defined for each program.
!
The Intelli-Sense Professional Controller enables four independent
program schedules (A, B, C and D) to be defined by one or two start
times with associated water window and a specific watering day
schedule. Each station is then assigned to one of the programs in
the Station Data function.