Filter
Top Products
MAINTENANCE
Side and Rear Flail Maintenance Section 4-4
©2011 Alamo Group Inc.
MAINTENANCE
ITEM SERVICE COMMENTS
Hydraulic Fluid Level Check Add if required per
fluid recommendations
Rear Flail Drive (if applicable) Lubricate Grease as instructed in
Bearing Flange and detailed maintenance section
Shaft Coupler
Cutter Shaft Lubricate Grease as instructed in
detailed maintenance section
Ground Roller Bearings Lubricate Grease as instructed in
detailed maintenance section
WEEKLY OR EVERY 50 HOURS
ITEM SERVICE COMMENTS
In Tank Hyd. Fluid Change Change after first 50
Filter hours only, then every
(10 micron filter) 500 hours or yearly
In-Line High Pressure Change Change after first 50
Filter hours only, then every
(10 micron filter) 500 hours or yearly
MONTHLY OR EVERY 150 HOURS
Hydraulic Fluid Level Check Add as needed
Hyd. Tank Breather Clean/Check/Replace Clean or replace
Element as required
Rear Tire Type Max P.S.I.
480/80R38 29
18.4-34 26
18.4-38 26