Filter
Top Products
ASSEMBLY
Assembly Section 2-3
CRANKSHAFT ACCESS
To access the crankshaft of the JD5065M and 5085-105M, a hole will need to
be cut in the front of the tractor casting. The battery plate will need to be raised to
cut the hole and attach the crankshaft adapter. To do this, remove and save the
bolts holding the battery plate to the tractor frame.
After the bolts have been removed, use a pry bar to raise the battery plate. Once the
plate is raised, use an appropriate block to keep the battery plate raised.
(ASM-JD-0086)
USE PRY BAR
TO RAISE
BATTERY LTE
USE
APPROPRIATE
BLOCK