Filter
Top Products
MAINTENANCE Teledyne API M701H High Performance Zero Air Generator
6-10 06712B (DCN5875)
NOTE
This procedure checks the majority of the components and
fittings. If you believe that there is still a leak, please contact
Customer Service at (858) 657-9800.
6.12 Particulate Filter Element Replacement
Replace the particulate filter located at the “Air In” inlet on the rear panel (refer to Figure
5-2) as follows:
1. Remove the particulate filter (Teledyne API, P/N FL15) cap by turning it
counter-clockwise.
2. Remove the old filter element and replace with a new filter element (Teledyne API
P/N FL16).
3. Replace the particulate filter cap and turn it clockwise to secure in place.