Tanaka TPS-2510, TPS-2510, TPS-250PF/PN, TPS-270PF/PN Pole Saw User Manual


 
www.tanaka-usa.com 14 custsvc@tanaka-ism.com
Owner’s Manual
TPS-2501,TPS-2510.TPS-250PN,TPS-270PN
Maintenance schedule
Below you will find some general maintenance instructions.
For further information please contact your service dealer.
Daily maintenance
Clean the exterior of the unit.
Clean the chain oil filter port.
Clean the groove and oil filter port in the guide bar
Clean the side case of saw dust.
Check that the saw chain is sharp.
Check that the bar nuts are sufficiently tightened.
Make sure that the chain transport guard is undamaged and that it can be
securely fitted.
Check that nuts and screws are sufficiently tightened.
Weekly maintenance
Check the starter, especially cord and return spring.
Clean the exterior of the spark plug,
Remove the spark plug and check the electrode gap. Adjust it to 0.6 mm (.024’), or
change the spark plug.
Clean the cooling fins on the cylinder and check that the air intake at the starter is
not clogged.
Clean the air filter.
Monthly maintenance
Rinse the fuel tank with gasoline, and clean fuel filter.
Clean chain oil filter.
Clean the exterior of the carburetor and the space around it.
Clean the muffler of carbon.