Filter
Top Products
DECK BELT REPLACEMENT
ENGINE TO DECK BELT
•Lower the deck to lowest setting
•Loosen tension on tension idler
•Remove worn or damaged belt
•Using part# 10263 belt, route it around
the engine pulley as shown in the diagram.
•Retighten the tension idler and check the
operation
DECK CROSS BELT
•Remove the belt covers
•Remove the engine to deck belt from
deck pulley
•Loosen the tension to the tension idler
•Remove the worn or damaged belt and
replace with part# 5058 belt
•Reinstall the engine to deck belt and
retighten both tension idlers
Belt coming from the electric clutch
will be routed around this idler pulley
on the outside.
As belt leaves the previous idler pulley
it will be routed around this flat idler
pulley to the inside and then forward
to the deck.
Tension on belt can be
adjusted by tightening or
loosening this nut.
12