Filter
Top Products
OVERVIEW OF DRIVE CONTROL LINKAGE
RIGHT SIDE SHOWN
Right side control handle
Pivot point for control handle movement
Pivot point
Adjustment threads on control rod
Forward and reverse control on hydrostat
DRIVE CONTROL ADJUSTMENTS (CONTINUED)
LEFT SIDE SHOWN
Once both hydro units are pulling
equally, make your final control handle
adjustment with this ball linkage.
Whichever handle is going the farther
forward, lengthen the linkage on that
side until the handles are straight across
when mower is traveling in a straight
line. If a lot of adjustment is needed,
shorten the linkage on the opposite side
for half of the adjusting.
9