Filter
Top Products
8.0 Control Functions
8.1 Control Panel
A. LED Display: can display current
water temperature (default display),
water temperature setpoint,
selected skimming/heating mode,
and error messages.
B. Heat Indicator: lit when heater is
on.
C. Warmer ( + ) Button: increases
water temperature setpoint.
D. Cooler ( - ) Button: decreases water temperature setpoint.
E. Jets 1 Button: turns jets pump #1 on and off. Press once for low
speed; press a second time for high speed; press a third time to turn
pump #1 off.
F. Light Button: turns underwater light on and off.
G. Jets 2 Button: turns high-speed jets pump #2 on and off. Press once to
turn on; press a second time to turn pump #2 off (2-pump models only).
Operation Details
•Temperature Adjustment: 65 to 104 °F (18 to 40 °C). Factory
default setting is 100 °F (38 °C).
• Underwater Light Operation: light runs for 1 hour then shuts
off for increased bulb life.
•Jets 1/Jets 2 Button Operation: jets run for 20 minutes after
activated, then turn off automatically to conserve energy. Simply
press either jets button to continue operation for an additional 20
minutes.
Page 14
B C D
E
F
G
A