Filter
Top Products
Step 8
Raise the Wall Sections
Have your assistant raise one of the wall
sections that has the corner uprights
attached. Then raise one of the wall
sections without a corner upright. The
two wall sections should be positioned
as shown in Diagram 8.
Step 9
Join the Wall Sections
The Wall Section WITHOUT corner
uprights must be attached to the INSIDE of
the corner upright of the adjoining Wall
Section as shown in Diagram 9.
NOTE: The rafter assembly will not fit
on the wall assembly if the wall sections
are not joined properly.
Step 10
Once the wall sections are properly
positioned, have your assistant hold the
sections in place. Join the wall sections by
attaching the corner upright to the wall
section with four 2-1/2" screws as shown in
Diagram 10.
Repeat 9 and 10 for the two remaining
wall sections.
6
Sundance Spas Gazebos Installation Instructions WillowWood
Close up of wall
section with corner
upright attached
Wall Section
WITHOUT
corner uprights
attached
Wall Section
WITH
corner uprights
attached
DO NOT join
wall sections on
outside of corner
upright.
Join Wall Sections on INSIDE
of corner upright.
Diagram 8
Diagram 9
Diagram 10