Filter
Top Products
ENGLISHFRANÇAISEESPAÑOL
-
13
-
Pull briskly
(e) Pull the starter handle slowly until
passing the compression point
(resistance will be felt), then return
the handle to its original position
and pull briskly.
■
If the engine fails to start after several
attempts, repeat above procedures
with choke lever returned to "OPEN"
position.
■
Do not fully pull out the rope.
■
After starting, allow the starter handle
to return to its original position while
still holding the handle.
(f) After the engine started, return the
choke lever gradually to "OPEN"
position.
Choke lever
CLOSE
OPEN
(g) Warm up the engine without a load for
a few minutes.