Filter
Top Products
9
MAINTENANCE
Unplug the unit and let it cool completely.
• To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a
mild detergent if necessary. After cleaning, dry the unit with a soft cloth.
• DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the
heater. This may cause damage or deterioration to the surface of the heater.
• Although this heater is outdoor approved, DO NOT immerse the heater in water for your safety.
Wait until the unit is completely dry before use.
WHEN THE HEATER IS NOT IN USE
When not using the heater for an extended period of time, place the electrical cord inside the decorative cone
that covers the bottom part of the pole. To do so, simply lift the cone and wrap the electrical cord around the
bottom pole. When the cord is completely wrapped around the pole, slide the cone back down covering the
cord and bottom of the pole.
STORAGE
If the heater will not be used for a long period of time, store it in a cool, dry location when not in use. To
prevent dust and dirt build-up, use the original packaging to repack the unit.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
• Check if the power cord is plugged into an electrical outlet, if not, plug in.
• Check if electricity to the main fuse is working.
• Make certain the power switches are turned on. If not, choose a setting.