Filter
Top Products
7
4) Before using the heater, align the power cord with the cutout on the weighted base and secure using the
attached fasteners on the bottom of the weighted base. There is one fastener located near the middle of the
weighted base, and another fastener located near the cutout at the end of the base. Place the cord through
each fastener and tighten to secure the cord to the base. After securing the power cord to the fasteners,
place the rubber ring located around the power cord in the cutout on the weighted base. Properly attaching
the power cord to the weighted bases will allow the heater to be moved easily and prevent damage to the
power cord.
BASIC ASSEMBLY (CONTINUED)