Filter
Top Products
6
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER YARD CRUISER. Its purpose, aside from
recommending standard operating procedures and routine
service requirements, is to promote SAFETY through the
use of accepted operating practices. Read, Understand and
Follow the IMPORTANT SAFETY INSTRUCTIONS on
Pages 2 and 3 of this manual and All SAFETY messages
on the YARD CRUISER and its attachments before
operating. SNAPPER recommends returning the YARD
CRUISER to an authorized SNAPPER dealer annually for
inspection and addition of any new devices which might
upgrade the safety of the mower.
1.2 NOMENCLATURE
The nomenclature drawing above, Figure 1.1, shows the
essential parts of the SNAPPER YARD CRUISER. It is
recommended that all operators of this equipment
become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are found
in the separate engine owner’s manual. Study these
manuals before operating and keep both handy for future
reference. For the nearest SNAPPER dealer in your
area, check the yellow pages under the heading LAWN
MOWERS. For engine parts and service, look for the
engine manufacturer’s dealers under the heading,
ENGINES - gasoline.
KEY
SWITCH
JOYSTICK
CONTROL
HANDLE
OPERATOR’S
SEAT
FUEL
TANK
PARKING
BRAKE
BRAKE
RELEASE
BUTTON
CHOKE
CONTROL
BLADE
SWITCH
ENGINE
SPEED
CONTROL
DECK LIFT
HANDLE
DISCHARGE
DEFLECTOR
IMPORTANT! The figures and illustrations in
this manual are provided for reference only
and may differ from your specific model.
Contact your Snapper dealer if you have
questions.