Filter
Top Products
3
OPERATOR’S SEAT
1. Seat Bracket Installation
A. Insert carriage bolts into seat brackets. Secure
carriage bolts with retainers. See Figure 7.
FIGURE 7
B. Secure seat brackets onto bottom of the seat
with cap screws. Tighten securely. See Figure 8.
FIGURE 8
2. Seat Switch Installation
A. Insert seat switch into bottom of seat by
pushing down into hole. See Figure 9.
FIGURE 9
B. Slide switch toward the rear of the seat and
pull up to snap into place. See Figure 10.
FIGURE 10
C. Make sure both tabs are locked to the outside
edge of hole. See Figure 11.
FIGURE 11
INSERT SEAT
SWITCH INTO HOLE
PUSH SWITCH DOWN AND
SLIDE TOWARD THE REAR
OF THE SEAT
PULL SWITCH UP AND
SNAP INTO PLACE
MAKE SURE TABS
ON BOTH SIDES
ARE LOCKED INTO
OUTSIDE OF HOLE
INSERT CARRIAGE BOLTS INTO
SEAT BRACKET AND SECURE
WITH BOLT RETAINERS
SEAT BRACKET
RETAINER
RETAINER
SECURE SEAT BRACKET TO
SEAT WITH CAP SCREWS.
TIGHTEN SECURELY.