Filter
Top Products
7
Section 1 - FAMILIARIZATION
FIGURE 1.1
1.1 INTRODUCTION
This manual has been prepared for the operator’s of the
SNAPPER MID MOUNT Z-RIDER. Its purpose, aside
from recommending standard operating procedures and
routine service requirements, is to promote SAFETY
through the use of accepted operating practices. Read,
Understand and Follow the IMPORTANT SAFETY
INSTRUCTIONS on Pages 2 thru 4 of this manual and
All SAFETY messages on the MID MOUNT Z-RIDER
and its attachments before operating. SNAPPER
recommends returning the MID MOUNT Z-RIDER to an
authorized SNAPPER dealer annually for inspection
and addition of any new devices which might upgrade
the safety of the mower.
1.2 NOMENCLATURE
The nomenclature information above, Figure 1.1, shows
the essential parts of the SNAPPER MID MOUNT Z-
RIDER. It is recommended that all operators of this
equipment become thoroughly familiar with the controls,
components, and operation of this machine before
operating. Specific details involving the engine are
found in the separate engine owner’s manual. Study
these manuals before operating and keep both handy
for future reference. For the nearest SNAPPER dealer
in your area, check the yellow pages under the heading
LAWN MOWERS. For engine parts and service, look
for the engine manufacturer’s dealers under the
heading, ENGINES - gasoline.
IMPORTANT
The figures and illustrations in this manual
are provided for reference only and may
differ from your specific mo
del. Contact
your Snapper dealer if you have questions
CONTROL PANEL
(SEE INSET)
DECK LIFT PEDAL
PARKING
BRAKE LEVER
MOTION CONTROL
LEVER
DECK LIFT
LEVER
DISCHARGE
DEFLECTOR
RIGHT HAND
FUEL TANK
OPERATOR’S
SEAT
LEFT HAND
FUEL TANK
MOTION CONTROL
LEVER
BLADE
SWITCH
HOUR
METER
ENGINE
SPEED
CONTROL
CHOKE
CONTROL
KEY
SWITCH