Filter
Top Products
How to Transport the Unit
To transport the unit, follow the steps below.
1. Disengage the blades.
2. Raise the deck lift lever to the highest position.
3. Move the throttle control to the FAST position.
4. Slowly push the speed control pedal forward to the
desired speed.
Mowing
How to Operate the Mower Deck
WARNING: The deflector is a safety device. Do not
remove the deflector. The deflector forces the
discharged material toward the ground. Always
keep the deflector in the down position. If the
deflector is damaged, replace the deflector with an
original equipment part from an authorized service
center.
1. Start the engine.
2. Release the parking brake.
3. Move the deck lift lever to a height of cut position. In
high or thick grass, cut the grass in the highest
position first and then lower the mower deck to a lower
position.
CAUTION: Do not operate with the mower deck in the
LEVEL ADJUSTMENT position. If you operate in the LEVEL
ADJUSTMENT position, the mower deck and blades can be
damaged.
4. Move the throttle control to the SLOW position.
5. Engage the blades.
6. Move the throttle control to the FAST position.
7. Slowly push the speed control pedal to the desired
speed.
NOTE: When you mow in heavy grass or mow with a
grass bagger, use a slow forward speed.
8. Make sure the level of cut set at the factory is still
correct. After you mow a short distance, look at the
area that was cut. If the mower deck does not cut level,
see the instructions on “How To Level The Mower
Deck” in the Maintenance section.
WARNING: For better control of the unit, always
select a safe speed.
Reverse Mowing Option (RMO)
WARNING: Mowing in reverse can be hazardous to
bystanders. Tragic accidents can occur if the
operator is not alert to the presence of children.
Never activate RMO if children are present.
Children are often attracted to the unit and the
mowing activity.
1. Engage the blades.
2. Insert the supplied key into the RMO switch, located to
the right of the steering wheel bellows (Figure 16).
3. Turn the key. The L.E.D. light will illuminate, indicating
thet the RMO feature has been activated. The mower
deck can now be operated while the unit is traveling in
reverse.
4. The reverse mowing option is deactivated when the
blades are disengaged, and must be reactivated each
time the blades are engaged, if desired.
5. Remove the key to restrict access to the RMO feature.
WARNING: The engine will shut off if the speed
control pedal is moved into reverse while the
blades are engaged and the RMO is not activated.
Figure 16: Reverse Mowing Option (RMO)
A - Key
B - RMO switch
C - L.E.D. light
16 www.snapper.com
English
A
C
B