Filter
Top Products
Section 2 - OPERATING INSTRUCTIONS
2,6. ROLLING TRACTOR WITH ENGINE OFF
2,6.1. Rolling Hydro Models
1. With engine "OFF", move to rear of tractor.
2, Pull the roll release control all the way out to
disengage the hydro transmission. See Figure 2.15.
PULL ROLL RELEASE
CONTROL ALL THE WAY
OUT TO DISENGAGE
HYDRO TRANSMISSION
ROLL RELEASE
CONTROL
WARNING
DO NOT disengage the hydro transmission and coast
down slopes. DO NOT use Roll Release Control to
disengage hydro transmission unless machine motion
can be controlled and engine is off.
PUSH ROLL RELEASE
IN TO ENGAGE HYDRO
TRANSMISSION
ROLL RELEASE
CONTROL
FIGURE 2.15
3. Move tractor to desired location.
4. Set park brake.
5, Push roll release control all the way
hydro transmission. See Figure 2.15.
in to engage
NOTE: The transmission will not propel the tractor if it is
left in the "ROLL" position.
10