Filter
Top Products
55
40” TWO STAGE SNOWBLOWER (page 8 of 8)
ITEM PART NO. DESCRIPTION
-- 6-3004 KIT, 40” Two Stage Snowblower (continued) (Incl. items 82 thru 104)
82 663239* CASING, Right Hand
83 656090* PLUG, 1/8” NPT (2)
84 654927* BREATHER, 1/8” NPT 5 PSI
85 663240* CASING, Left Hand
86 661147* BEARING (2)
87 663241* SEAL (2)
88 663245* PIN, 3/16 x 1/2” Long Dowel (2)
89 661150* FROST CAP
90 663242* BRASS GEAR, 8 DP 4 LH
91 661161* INPUT SHAFT
92 663234* BEARING
93 663243* PIN, 5/16 x 1-1/4” Long Spring
94 663244* SEAL
95 663238* WORM, 8 DP 4 LH
96 663040* BRACKET, Left Idler
97 663039* BRACKET, Right Idler
98 656040* SPRING
99 659519* PULLEY, Idler (2)
100 663050* BELT GUIDE (short bend)
101 663051* BELT GUIDE (long bend)
102 662896* TENSION ROD
103 663043* SPACER
104 663074* EYE BOLT, 5/16-18 x 5”
105 -- NUT, 5/16-18 Hex Lock (6)
106 9-0370 BOLT, 5/16-18 x 1-3/4” Hex (2)
107 -- BOLT, 5/16-18 x 2-1/4” Hex (4)
108 -- BOLT, 1/2-13 x 8” Hex
109 -- BOLT, 3/8-16 x 2-3/4” Hex
110 -- NUT, 1/2-13 Hex Nyloc
111 9-1809 PIN, 1/8 x 1-1/4” Cotter (2)
112 9-1595 WASHER, 7/16” Flat (4)
113 9-0130 NUT, 3/8-16 Hex (2)
114 9-1493 NUT, 5/16-18 Hex Nyloc (2)
115 9-0623 BOLT, 3/8-16 x 2-1/4” Hex
NOTE: Items 105 thru 115, shown on the previous page, are not part of this kit.
*RAD Technologies, Inc. part number (other numbers are Snapper)
MANUAL No. 06929 COMMERCIAL WALK-BEHIND ACCESSORIES