Filter
Top Products
b. Pull one of the 4 red tabs out and remove the filter
bag from the bottom lid. Turn the filter bag inside
out. Use a garden hose to wash it thoroughly. The
bag should be laundered periodically, using a
regular wash cycle.
c. Rinse the bottom lid parts and bottom brushes.
d. Refit the filter bag with the fluffy surface inward.
Start from one corner - align one of the red tabs
with the corner. Gently insert the stitched edge of
the filter bag into the double walls (groove) of the
bottom lid, and work your way around.
e. Replace the bottom lid assembly in the body of the
unit and lock in place.
3) Impeller
Occasionally hair or linen may get caught in the impeller. If that happens, take
the top grill off by removing the 2 screws from the top. MAKE SURE THE
TRANSFORMER IS UNPLUGGED. Remove the debris. Replace the top grill
and tighten the 2 screws.
4) Front Drive Wheels and Rear Idler Wheels
Remove debris or tree leaves caught in the axle bearing. CAUTION: Do not
turn the drive wheels by force. This may cause damage to the drive gear train.
5) Winterization
Always remove cleaner from pool for winterization. Do not store Robo-Kleen
where the temperature drops below 40˚ F. Freezing temperatures can affect
seals and lubricants used in the mechanism.
7