Filter
Top Products
Underside of Mobile Cleaning Unit
Suction Ports
Cleaning Brushes
Locking Tabs
Locking Tabs
The power supply should be positioned so that Robo-Kleen can reach all the
walls of the swimming pool and must be at a minimum distance of 10 feet from
the edge of the pool.
CAUTION: INSURE THE THE 110V MAIN LINE OUTLET IS PROTECTED BY A
GROUND FAULT CIRCUIT INTERRUPTER (GFCI) OR EARTH LEAKAGE CIRCUIT
INTERRUPTER (ELCI). OTHERWISE, DEATH OR INJURY CAN RESULT.
Installation
!
DO NOT ALLOW POWER SUPPLY TO BECOME SUBMERGED IN POOL.
DEATH OR INJURY CAN RESULT. DO NOT PLACE ON EDGE OF POOL.
POWER SUPPLY MUST NOT FALL INTO POOL!
To connect Robo-Kleen to the power supply,
remove the cap on the transformer output socket.
Plug the Robo-Kleen cord into the socket. Notice
the plug and socket are indexed using pins.
Tighten the threaded plug cover so that the cord is
securely attached.
4