Filter
Top Products
Normal Removal
11
Collector Removal
1. Unhook strap (N) from pin (M). Slide middle tube into
upper tube (O) and remove middle tube (S). Remove
upper tube (O) from cover (B).
2. Lift up cover (B) remove and empty bags (E).
3. Unhook strap (I) from locknut and capscrew (G).
Remove lower chute (L) from mounting plate (J).
See that the discharge deflector (H) returns to the
DOWN position.
4. Remove pin (C) by turning clockwise and pulling out
of hitch (D).
5. Lift and remove channel assembly (A) and cover (B)
from hitch (D).
WARNING
OPERATION WITHOUT BAGGER
For operation without bagger, the mower
deflector MUST be properly installed in the down
position and retained by the spring latch.