Filter
Top Products
9
Initial Setup - 30” Models
3. Install 5/16-18 x 2-1/4 carriage bolt (A, figure 8)
through front hole in mower deck along with cup (B),
whiz flange nut (C), wing nut (D) and center lock nut
(E). Nut (C) must be seated inside cup and center
lock nut (E) should be flush with end of carriage bolt.
Figure 8.
A. Carriage Bolt, 5/16-18 x 2-1/4
B. Cup
C. Whiz Flange Nut, 5/16
D. Wing Nut
E. Centerlock Nut, 5/16
4. Place adapter over rear carriage bolt (A, figure 9) and
position front slot of adapter between mower deck
and wing nut (B). Install jam nut (C) on carriage bolt.
Securely tighten both jam nut and wing nut.
5. Go to FRAME AND BAGGER SUPPORT ASSEM-
BLY - ALL MODELS to continue assembly proce-
dures.
E
D
C
B
A
Figure 9. (30” Mower Shown)
A. Adapter
B. Wing Nut
C. Deflector
D. Jam nut, 5/16-18
E. 1/2” Hole
1/4"
Drill 1/2" Hole
1"
E
E