Filter
Top Products
6
Product Description
Using the illustration as a guide, famil-
iarize yourself with your machine and its
various components. Understanding your
machine helps ensure top performance,
long service life and safer operation.
WARNING!
Do not make unauthorized
modications or alterations to any of
these units or their components.
IMPORTANT!
The terms “left”, “left-hand”, and
“LH”; “right”, “right-hand”, and “RH”;
“front” and “rear” refer to directions as
viewed by the operator during normal
operation.
Outer Tube
Trimmer Head
Grip
Cutting
Attachment Shield
Gearcase
Handle
Throttle
Trigger
Ignition
Switch
Fuel
Tank
Specications
Model T282
Engine Type Air cooled, two stroke, single cylinder gasoline engine
Dry Weight (Without guard and strap) 6.6 kg / 14.7 lb
Dimensions 1775 x 314 x 345 mm / 69.9 x 12.4 x 13.6 in.
Bore x Stroke 1.38 x 1.18 in./ 35 x 30 mm
Displacement 28.9 cc/1.7 cu. in.
Fuel/Oil Ratio 50:1 with *ISO-L-EGD or JASO FD class engine oil
Fuel Tank Capacity
750 ml/25.4 oz..
Carburetor Type Diaphragm-type carburetor
Ignition One-piece electronic, transistor-controlled
Spark Plug BPMR6A
Spark Plug Gap 0.6 mm (0.024 in)
Torque 16.7 - 18.6 N∙m (148-165 in • lbf)
Air Cleaner Type Non-reversible foam lter element
Starting Method Recoil
Stopping Method Slide switch
Transmission Type Automatic, centrifugal clutch w/bevel gear
Engine Idle Speed 3,000 RPM
Clutch Engagement Speed 3,800 RPM
Wide Open Throttle Speed (W.O.T.) 9,600 RPM
*Specications are subject to change without notice.
Emission Control (Exhaust & Evaporative)
EPA 2010 and Later and/or C.A.R.B. TIER III
The emission control system for the engine is EM (engine modication) and, if the second to last character of the Engine
Family on the Emission Control Information label (sample below) is “C”, “K”, or “T”, the emission control system is EM and
TWC (3-way catalyst). The fuel tank/fuel line emission control system is EVAP (evaporative emissions). Evaporative emis-
sions for California models may only be applicable to fuel tanks.