Filter
Top Products
4
Safety Labels
Figure 3
IMPORTANT!
Safety and Operation Information
Labels: Make sure all information
labels are undamaged and read-
able. Immediately replace dam-
aged or missing information labels.
New labels are available from your
local authorized Shindaiwa dealer.
Be Aware of the Working Environment
Avoid long-term
operation in very hot or very
cold weather.
Make sure bystanders or observers outside the 50-
foot “danger zone” wear eye protection.
Be extremely careful
of slippery terrain,
especially during rainy
weather.
Always make sure the
appropriate cutting attachment
shield is correctly installed.
If contact is made with a hard
object, stop the engine and
inspect the cutting attachment
for damage.
When operating in rocky terrain or near elec-
tric wires or fences, use extreme caution to
avoid contacting such items with the cutting
attachment.
Be constantly alert for objects and debris that
could be thrown either from the rotating cutting
attachment or bounced from a hard surface.
Reduce the risk of by-
standers being struck by
ying debris. Make sure
no one is within 50 feet
(15 meters)—that’s about
16 paces—of an operating
attachment.
Figure 2
50
FEET
C2510