Filter
Top Products
Cable
Adjuster
Lock Nut
5RWDWHFDEOHDGMXVWHULQRURXWWRREWDLQSURSHUIUHHSOD\
4 - 6 mm
7KURWWOHOHYHUIUHHSOD\
8
The throttle lever free play should be
approximately 4 - 6 mm. Make sure that
the throttle lever operates smoothly with-
out binding. If it becomes necessary to
adjust the lever free play, follow the pro-
cedures and illustrations that follow.
Loosen the air cleaner cover knob(s) 1.
and remove the air cleaner cover.
Loosen the lock nut on the cable 2.
adjuster. Turn the cable adjuster in or
out as required to obtain proper free
play 4 - 6 mm.
Tighten the locknut.3.
Reinstall the air cleaner cover.4.
Throttle lever free play
Adjusting cutter assembly for storage or transportation
Assembly (continued)
With the engine off, install the scab-1.
bard onto the blade.
Release the latch lock and the latch 2.
release. Make sure the cutter blades,
latch lock, and the latch release return
securely to the straight ahead position.
Make sure the scabbard is in place on 3.
the blade before storing or transporting.
WARNING!
Never run the engine when
adjusting the cutter assembly to the
storage position.
0DNHVXUHWKHVFDEEDUGLVLQSODFHEHIRUH
VWRULQJRUWUDQVSRUWLQJ
Transport / storage position