Shindaiwa AHS2510 Trimmer User Manual


 
5
Product Description
Using the illustration as a
guide, familiarize yourself
with the Shindaiwa AHS2510
articulated hedge trimmer
and its various components.
Understanding your machine
helps ensure top performance,
longer service life, and safer
operation.
Handle
Outer
Tube
Hedge Trimmer Cutter
Assembly
Cutter
Assembly
Adjustment
Lever
Cutter
Blade
Cover
Fuel
Tank
Guard
Gearcase
Hedge Trimmer
Cutter Assembly
Cutter Bar and
Cutter Blades
Latch
Release
Latch Lock
Air Filter
Assembly
Powerhead Assembly
Spark Plug
Fuel
Tank
Ignition
Throttle
interlock
Fuel Tank
Guard
Throttle Trigger
6SHFLÀFDWLRQV
* The EPA emission compliance referred to on the emission compliance label located on the engine, indicates the number of operat-
ing hours for which the engine has been shown to meet Federal emission requirements. Category C = 50 hours (Moderate), B = 125
hours (Intermediate) and A = 300 hours (Extended).
** The NGK CMR5H also meets the requirements for electro magnetic compliance (EMC).
Specifications are subject to change without notice.
Model AHS2510
Engine Type 4-cycle, vertical cylinder, air cooled
Engine Bore x Stroke 34 x 27 mm/1.34 x 1.06 in.
Engine Displacement 24.5cc/1.5 cu. in.
Unit Weight, Less Fuel 6.2 kg/13.6 lbs.
Unit Dimensions (LxWxH) 1670 x 197 x 250 mm / 65,8 x 7,8 x 9,9 in.
Max. Power 7,500 min
-1
(rpm)
Recommended idle speed 3,000 (±300) min
-1
Fuel Tank Capacity 590 ml/20 oz..
Fuel/oil ratio 50:1 with *ISO-L-EGD or JASO FC class 2-cycle Mixing Oil
Carburetor Walbro WYL, Diaphragm type
Ignition Fully electronic, program controlled
Spark Plug NGK CMR5H
Electrode Gap 0.6 - 0.7 mm/ .024 -.028 in.
Torque 100-150 kg cm / 9.8 - 14.7 N∙m
Air Cleaner Foam pre-filter; main filter: dry element
Starting Method Recoil type
Stopping Method Slide switch, grounding type
Blade Length 590 mm / 20.3 in
Clutch Type Automatic, centrifugal clutch with bevel gear
Gear Type Spur gears
Gear Lubrication Lithium-based grease
Standard Equipment
Tool kit w/ spark plug wrench, 4mm hex wrench, 8 x 10 mm spanner, front handle w/guard, tool set, blade scabbard.
EPA Emission Compliance Period* Category A
WARNING!
Do not alter this machine
or any of its components!