Shindaiwa 81719 Edger User Manual


 
4
Safety Labels
Figure 3
IMPORTANT
Safety and Operation Information
Labels: Make sure all information
labels are undamaged and readable.
Immediately replace damaged or miss-
ing information labels. New labels are
available from your local authorized
Shindaiwa dealer.
LE2510
This label indicates the minimum
distance between front handle and
rear grip.
Be Aware of the Working Environment
Avoid long-term operation
in very hot or very cold
weather.
Make sure bystanders or observers
outside the 50-foot “danger zone”
wear eye protection.
Be extremely careful of
slippery terrain, especially
during rainy weather.
Always make sure the appro-
priate cutting attachment shield
is correctly installed.
If contact is made with a hard
object, stop the engine and inspect
the cutting attachment for damage.
When operating in rocky terrain or
near electric wires or fences, use ex-
treme caution to avoid contacting such
items with the cutting attachment.
Be constantly alert for objects and
debris that could be thrown either
from the rotating cutting attachment
or bounced from a hard surface.
Reduce the risk of by-
standers being struck by
ying debris. Make sure
no one is within 50 feet
(15 meters)—that’s about
16 paces—of an operating
attachment.
Figure 2
50 FEET
50 FEET
(15m)
KEEP BYSTANDERS AWAY
AT LEAST 50 FEET (15m)
BEWARE OF THROWN OR
RICHOCHETED OBJECTS
KEEP AWAY FROM
ROTATING BLADE
Shindaiwa
READ THE
OPERATOR’S MANUAL
WEAR HEARING AND
ANSI Z87.1 APPROVED
EYE PROTECTION
P/N 19422-00046