Filter
Top Products
ENGLISH
ENGLISH
Thank you for purchasing this SHARP Plasmacluster Ion Generator.
Please read this manual carefully before using Plasmacluster Ion
Generator.
After reading, keep the manual in a convenient location for future
reference.
E-1
CONTENTS
IMPORTANT SAFETY INSTRUCTIONS
...............
E-2
• WARNING
...............................................................
E-2
• CAUTIONS CONCERNING OPERATION
......................
E-3
PARTS NAME
........................................................
E-4
• MAIN UNIT • CONTROL PANEL/DISPLAY
..........................
E-4
• BACK
...................................................................................
E-4
INSTALLATION GUIDANCE
........................................
E-5
OPERATION
......................................................................
E-7
CLEANING AND MAINTENANCE
.............................
E-8
• FILTER
.................................................................................
E-8
• MAIN UNIT
...........................................................................
E-9
PLASMACLUSTER ION GENERATING UNIT REPLACEMENT
..
E-10
REPLACING THE FUSE
..............................................
E-11
SPECIFICATIONS
..........................................................
E-11
TROUBLESHOOTING .........................................
E-12
INFORMATION ON DISPOSAL
................................
E-13
FOR CUSTOMER ASSISTANCE(U.K.,Ireland)
...
E-14
FOR CUSTOMER ASSISTANCE(Australia, New Zealand)
...
E-15
• While IG-BC2J can remove suspended viruses and other
contaminants, it cannot create a completely sterile environment.
SHARP does not guarantee its ability to prevent microbial
infection.
• To enable stable emission of high-density Plasmacluster ions, the
Plasmacluster Ion Generating Unit mounted in IG-BC2J will need
to be replaced periodically*
.
•
The unit is designed for ordinary passenger cars with DC 12V batteries.
It cannot be used in vehicles with DC 24V batteries (buses, trucks, etc.).
* Replacement is required approximately every 6 years (17,500 hours) when
operated 8 hours a day. IG-BC2J will stop operating after about 6 years
and 6 months (19,000 hours) if the Plasmacluster Ion Generating Unit is
not replaced.