Sharp IG-BC2J Portable Generator User Manual


 
E-8
CLEANING AND MAINTENANCE
FILTER
Every week or more often if necessary
The lter must be cleaned regularly in order to maintain the ion density.
Filter soiling depends on the usage environment, so clean the lter about once
a week or whenever the lter is clogged, even if the Filter Clean Light has not
turned on.
Gently remove dust
from the filter of
back side by using a
vacuum cleaner.
<For Stubborn Dirt>
Remove and rinse in water. (Use a soft sponge if
the dirt does not come off easily.)
Be careful the cushioning material does not come
off.
1
Do not press the vacuum cleaner strongly against the lter, or the lter could be damaged.
If using synthetic kitchen detergent, rinse well to remove all traces of the detergent.
Also, be sure to dry the lter in the shade.
Filter
Rinse
Wipe with a dry cloth.
Reattach
Press the Reset Button for at
least 3 seconds.
Once cleaning is completed, connect
the car adapter, then press and hold in
the Reset Button for at least 3 seconds
to turn off the lter clean light.
RESET
(Press 3sec.)
MODE
RESET
(Press 3sec.)
MODE
FILTER
CLEAN
UNIT
Even if the Filter
Clean Light is off,
press and hold in the
Reset Button for at
least 3 seconds after
cleaning.
Filter Clean Light
Filter Clean Light will be lit after
approx. 3 months (approx. 720
hours), when operated 8 hours a day.
Reset Button
Filter Clean
Light
When the Reset Button is pressed and
held in for at least 3 seconds, the light
ashes twice then turns off.
(Dry in the shade.)
2