Filter
Top Products
TROUBLESHOOTING
Problem
WHAT TO DO
The Plasmacluster Ion Generator
does not work.
•
Is a Car Adapter connected properly?
Please be connected defi nitely.
•
Does not a fuse blow?
Replace with a new fuse. (See E-11)
Flashing
faster (red)
Flashing (blue)
It is over the exchange period of
Plasmacluster
Ion Generating Unit
.
Replace with new Plasmacluster Ion Generating
Unit
. (See E-10)
Plasmacluster Ions are not released.
Press the Mode Button and restart.
Clean the electrode section of the unit.
(See E-9)
Is the unit installed correclly?
Remove the unit, fully inserted again and press
the Mode button.
UNIT
UNIT
FILTER
CLEAN
UNIT
Flashing (red)
Flashing (blue)
The discharged air has odor.
• Filter is getting dirty.
Clean the fi lter. (See E-8)
• The Plasmacluster Ion Generator releases a
small trace of ozone which may produce odor.
This is not detrimental to health.
A discontinuous noise is heard.
A clicking or ticking sound
comes from the unit.
The air fl ow decreases.
• Clicking or ticking sounds may be audible when
the unit is generating ions.
• Dust may block the fi lter, clean the fi lter.
(See E-8)
• Wind quantity sometimes becomes strong
during operation with LOW mode, to confi rm
the condition of ion be not abnormal.
E-12
Other indication.
Failure
Unplug and contact the store you purchased or
Sharp Service Center.