Filter
Top Products
10
SAFETY - Machine Specific
(Continued)
Hazard Points on the Vineyard Seeder
(Continued)
Guards
Gearbox deflection and flap handle guards are provided to
avoid grape vines getting caught up in componentry. They
also assist in preventing hands getting caught up in sprockets,
drive chains and chain tensioners. These guards must be
fitted while the machine is in use.
Warning: Access to pinch points is still possible from
underneath or behind the guards.
For guard locations on machine, refer Page 11.
Box Lifting Profiles
The box set lifting profiles mounted to the dual box assembly
ends are provided for easy removal of the boxes from the
pedestals. Do not use to lift the machine.
Calibrating
Be particularly careful when calibrating the seeding rate. At
this time, the calibration trays have been removed and are no
longer covering the rotating seeder units. See Pinch
Points/Moving Parts (Page 9) for hazardous areas.
Transport
The two wheels located at the rear of the machine (one on
each side) are for the purpose of disc depth control and
gearbox input drive. These must not be used to support the
machine weight during transport (while linked to the tractor).
Ensure that all linkage pins and security clips are fitted
correctly. Refer Page 12 for important imformation.
Maintenance
Refer Page 25 - 30 for reference to the Maintenance & Care
section of the manual.
Lubrication
Refer Page 26 for reference to the Lubrication section of the
manual.