Filter
Top Products
OPERATION
2412 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tractor, tire size, hydraulic system and bucket used. The specifications are given
for a loader equipped with 84” material bucket operated with an average tractor hydraulic system of 25.8 GPM
with engine operating at 2300 RPM and control valve relief setting of 2750 PSI.
Horsepower Range 90-130 HP
System pressure/flow rate 2750 PSI/ 25.8 GPM
Lift Capacity to maximum height 3056 lbs.
Breakout force at pivot pin 8240 lbs.
Rollback force at ground line 7244 lbs.
Total weight with bucket (approx.) 2060 lbs.
Raising time to full height 5.36 seconds
Lower time 4.34 seconds
Attachment dump time 4 seconds
Attachment rollback time 3.56 seconds
Hydraulic system flow 25.8 GPM
System pressure at rated flow 2750 PSI
(A) Maximum Clearance at Full Height 149.5”
(B) Clearance with Bucket Dumped 117”
(C) Reach at Maximum Height 39.69”
(D) Maximum Dump Angle 50°
(E) Reach with Attachment on Ground 89.5”
(F) Attachment Rollback Angle 13°
(G) Digging Depth 4”
(H) Overall Height in Carry Position 80”
(Manufacturers estimated specifications and design subject to change without notice.)