Filter
Top Products
OPERATION
2407TL 01/11 Operation Section 4-3
© 2011 Alamo Group Inc.
OPERATION
1. Standard Equipment and Specifications
Specifications will vary with tire size, hydraulic system and bucket used. Specifications are given for a loader
equipped with a 60” bucket, external hydraulic system of 8.0 GPM with engine operating at 2900 RPM and
relief setting of 2000 PSI.
Horsepower Range 20-30 HP
System pressure/flow rate 2000 PSI/ 8 GPM
Lift Capacity to maximum height 1035 lbs.
Breakout force at pivot pin 1770 lbs.
Total weight with bucket (approx.) 735 lbs.
Raising time to full height 2.7 sec.
Lower time 2.0 sec.
Bucket dump time 2.6 sec.
Bucket rollback time 2.6 sec.
Hydraulic system flow 8 GPM
System pressure at rated flow 2000 PSI
A. Maximum Lift Height at Pivot Pin 83”
B. Maximum Height Under Bucket 78”
C. Clearance with Bucket Dumped 66”
D. Reach at Maximum Lift Height 30”
E. Maximum Dump Angle 45°
F. Reach with Bucket on Ground 59”
G. Bucket Rollback Angle 25°
H. Digging Depth 4”
I. Overall Height in Carry Position 47.50”
(Manufacturers estimated specifications and design subject to change without notice.)