Filter
Top Products
INTRODUCTION
1900 07/10 Introduction Section 2-3
© 2010 Alamo Group Inc.
INTRODUCTION
The Rhino Boom Mower is primarily designed for grass cutting and trimming hedges. This mower is assembled
for operation with 540 RPM tractor input only. With proper use and maintenance the mower should provide
years of dependable service.
For Non-Agricultural use, OSHA, ASAE, SAE and ANSI standards require the use of Chain
Guards, Deflectors, or Solid Skirts at all times. The Mower manufacturer strongly
recommends the use of Chain Guards, Deflectors, or Solid Skirts for Agricultural purposes
as well to reduce the risk of property damage, serious bodily injury, or even death from
objects thrown out by or from contact with the Cutting Blades.
At least 20% of the tractor’s total weight must be on the front tires with the Mower lifted to
provide adequate traction for safe steering under good conditions. Slow down on hills, rough
terrain, and curves.
Mower Orientation: Front and rear, and left and right are determined by the normal direction of travel (the same
as on your automobile).