6
TECHNICAL SPECIFICATIONS
ENGINE
The motor-mower may be fitted with the following en-
gines:
− HONDA GC 160; 4 stroke benzina;
3,7 kW (5 HP); 160 cm
3
.
− LOMBARDINI LGA 226; 4 stroke benzina;
4 kW (5,4 HP); 220 cm
3
.
STARTING
Auto-winder device.
CLUTCH
Cone type in oil bath with control lever on handle-
bars.
GEARS
One forward gears and one reverse gear; gears are
engaged through a lever fitted on handlebars.
VELOCITÀ MASSIMA IN km/h
MODELLO MARCIA
I RM
(Pneumatici 3.50-6) 2,5 1,4
TRANSMISSION
Oil bath gear box.
POWER TAKE OFF
Mounted attachments are driven via an independent,
single speed PTO engaged by a control lever on the
handlebars.
Maximum PTO speed: 923 rpm (clockwise rotation).
COUPLING OF ATTACHMENTS
Coupling of attachments to the PTO is obtained
through a quick change fitting that provides for fast
installation of the attachments, and does not require
the use of bolts.
HANDLEBARS
Adjustable in height with dampers.
WHEELS
− Pneumatic tires with agricultural tread.
− Type and available sizes:
Tractor type: 3.50-6
− Inflation pressure: 1,2 bar.
ACCESSORIES
The motor-mower can be fitted with a wide range of
additional easy-to-fit accessories.
These are, for instance, several types of iron wheels,
watering pumps and sprayers, snowploughs,
ploughs, trailers, water sprinkling trolleys, etc.
Refer to our catalogue for details about the various
accessories available.
MASS
Refer to the plate installed on the machine.
DIMENSIONS
The overall dimensions of the motor-mower are
shown in fig. 2.