15
CUTTER BAR MOWERS MAINTENANCE
MECHANICAL CON-ROD DRIVE
Lubrication
After the first 5 hours of work, and subsequently af-
ter every 10 hours, grease the mower mechanism at
points (1) and (2) as shown in fig.5.
CAM MECHANISM MOVEMENT
Lubrication
Greasing or lubrication points are not available in this
system; it is however suggested to clean the coupling
between roller and knife mechanism after its use. In
order to avoid oxidation during long period of not use
of the sickle bar it is suggested to lubricate roller and
knife mechanism before storage.