Filter
Top Products
7
With the unit unplugged, use only mild
soap and a damp cloth to clean the tool.
Never let any liquid get inside the tool;
never immerse any part of the tool into a
liquid.
IMPORTANT: To assure product SAFETY
and RELIABILITY, repairs, maintenance
and adjustment should be performed by
Sears service centers or other qualified
service personnel, always using identical
replacement parts.
WARNING: DO NOT use the hedge
trimmer with any type of accessory or
attachment. Such usage might be
hazardous.
5. SIDE-TRIMMING HEDGES -
(Figure 13)
Begin at the bottom and sweep up.
WARNING
: To guard against injury
observe the following:
• Read instruction manual before using,
Save instruction manual.
• Keep hands on handles. Don’t
overreach.
• Do not use under wet conditions.
• Do not use with damaged extension
cords.
• Do not unplug or store with switch
locked on.
DANGER: KEEP HANDS AWAY
FROM BLADES.
CAUTION: BLADE COASTS AFTER
TURN OFF.
The cutting blades are made from high
quality, hardened steel and with normal
usage, they will not require resharpening.
However, if you accidentally hit a wire
fence, stones, glass or other hard
objects, you may put a nick in the blade.
There is no need to remove this nick as
long as it does not interfere with the
movement of the blade. If it does
interfere, unplug unit and while wearing
proper eye protection use a fine toothed
file or sharpening stone to remove the
nick.
If you drop the trimmer, carefully inspect
it for damage. If the blade is bent,
housing cracked, or handles broken or if
you see any other condition that may
affect the trimmer’s operation, contact
your local Sears Service Center for
repairs before putting it back into use.
Fertilizers and other garden chemicals
contain agents which greatly accelerate
the corrosion of metals. Do not store the
tool on or adjacent to fertilizers or
chemicals.
13
MAINTENANCE
ACCESSORIES