Filter
Top Products
LY
, r_
INSTALL MULCHER PLATE (See Figs. 4 and
5)
• Install two latch hooks to mulcher plate using screw,
washer, lock washer, and weld nut as shown.
NOTE; Pre-assemble weld nut to latch hook by inserting
weld nut from the top with hook pointing down.
, Tighten hardware securely.
• Raise and hold deflector shield in upright position.
° Place front of mulcher plate over front of mower deck
opening and slide into place, as shown.
• Hook front latch into hole on front of mower deck.
o Hook rear latch into hole on back of mower deck,
CAUTION: Do not remove discharge
guard from mower. Raise and hold
guard when attaching mulcher plate
and allow it to rest on plate while in
operation.
HOOK POINT_
WELD NUT DOWN
LOCK
WELD WASHER
NUT
SCREW
LATCH_
HOOK _"_'LATCH
HOOK
WASHER
MULCHER
PLATE
LOCK WELD
WASHER NUT
WASHER
_""_'SCREW
TO CONVERT TO BAGGING OR
DISCHARGING
Simply remove mulcher plate and store in a safe place.
Your mower is now ready for discharging or installation of
optional grass catcher accessory.
NOTE: It isnet necessary to change blades. The mulcher
blades are designed for discharging and bagging also.
FIG. 4
DEFLECTOR
SHIELD
LATCH
HOOKS
FIGo5
9