Filter
Top Products
E
CAUTION: BEFORE PERFORMING ANY SERV|CE OR ADJUSTMENTS:
- Depress clutchtbrake pedal fully and set parking brake.
o P_ace motion contro_ _ever tn neutral (N) position,
, Place attachment clutch in "DtS,ENGAGED" position,
, Turn ignition key "OFF" and remove key,
o Make sure the b|ades and all moving parts have completely stopped,
o Disconnect spark plug wire from spark ptug and place wire where it cannot come tn contact with
TO REMOVE MOWER (See Fig° I9)
Mewer wilt be easier to remove from the rght sde of tractor.
• ' D" i
o Place attachment clutch _n DISENGAGE poe t on
• Move attachment lift tever forward to lower mower to its
_, Roll belt off engir_e putiey
o D _ssonr_ectc_utch rod from clutch _ever by removiR_
retainer spring.
o Disconnect anti._sway bar frem chassis bracket by
removing retafner spr}ng_
o Disconnect suspension arms from rear deck brackets
by removing retainer spdngs.
o Disconnect front links from deck by removing retainer
o Raise lift _ever to raise suspens on arms_ Side mower
out from under tractor,
_MPORTANT: IF AN ATTACHMENT OTHER THAN THE
MOWER _S TO BE M©UNTED 1O _HE _RACTOR, THE
R,H AND LH, SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR,
TO _NSTALL MOWER (See Fig, 19)
o Rafse attachment lift lever to ts highest position.
o S_kJemower under tractor with d scharge guard to right
side af tractor_
o Lower lift lever to its lowest position.
o Insta_i mower in reverse order of removal instruct ors
CLUTCH LEVER
CLUTCH ROD
SPR_NG
SUSPENSION ENGINE
ARMS PULLEY
ANTe-SWAYBAR
RETAINER
SPRINGS
(BOTH SfBES)
F_G, 19
t8