Filter
Top Products
• ,,,,z
........ i
...... !
i
i
i
ERVICE A ADJ
STMENTS
CAUTION: BEFORE PERFORMING ANY SERVICE OR ADJUSTMENTS:
® Depress clutch/brake pedal fully and set parking brake,
, Place gearshift lever in neutrat (N) position.
Ptace attachment clutch in "DISENGAGED" position.
- Turn ignition key "OFF" and remove key.
Make sure the blades and all moving parts have completely stopped.
, Disconnect spark plug wire from spark plug and ptace wire where it cannot come in contact with
plug.
TO REMOVE MOWER (See Fig. 16)
Mower will be easier to remove from the rightside oftractor.
, Place attachment clutch in "DISENGAGED" position,
= Move attachment lift lever forward to lower mower to its
lowest position.
• Roll belt off engine putley.
- Disconnect clutch rod from clutch lever by removing
retainer spring.
o Disconnect anti-sway bar from chassis bracket by
removing retainer spring.
, Disconnect suspension arms from rear deck brackets
by removing retainer springs.
o Disconnect front links from deck by removing retainer
springs.
Raise lift lever to raise suspension arms. Slide mower
out from under tractor.
IMPORTANT: JFAN ATTACHMENT OTHER THAN THE
MOWER IS TO BE MOUNTED TO THE TRACTOR, THE
R.H, AND L.H, SUSPENSION ARMS MUST BE REMOVED
FROM TRACTOR,
TO iNSTALL MOWER (See Fig. 16)
* Raise attachment lift lever to its highest position.
, Slide mower under tractor with discharge guard to right
side of tractor.
* Lower lift lever to its lowest position.
o Instal mower in reverse order of removal instructions.
CLUTCH ROD\
CLUTCH LEVER
RETAINER
SUSPENSION
ARMS
ENGINE
PULLEY
\
RETAINER
SPRING
/
ANTI-SWAY BAR
RETAINER
SPRINGS
(BOTH SIDES)
FiG. 16
19