Filter
Top Products
i , i , ii,i i , ii , i , i iii i
SERVmCE AN ADJUSTMENTS
TO ADJUST ATTACHMENT LIFT SPRING
(See Fig. 33)
o While holding spring bushing with wrench, loosen jam
nut°
, Turn adjustment boit clockwise to extend spring and
reduce lift effort (for heavier attachments),
, Turn adjustment bolt counterclockwise for fighter at-
tachments,
, Retighten jam nut against spring bushing..
IMPORTANT: DO NOT ADJUST FOR MAXIMUM SPRING
TENSION WHEN USING LIGHT ATTACHMENTS SUCH
AS A MOWER. ADJUST LIFT LEVER SPRING TO AID IN
LtFT1NG ATTACHMENT. DO NOT OVERPOWER SPRING.
WHEN REMOVING ATTACHMENT, ALWAYS ADJUST
SPRING TENSION TO ITS LOWEST POSITION.
ADJUSTMENT
SPRING BUSHING
o ATTACHMENT
JAM NUT LIFT SPRING
° oJ
o o
FIG, 33
TO REMOVE HOOD AND GRILL ASSEMBLY
(See Fig, 34)
o Raise hood_
. Unsnap headlight wire connector
o Stand in front of tractor. Grasp hood at sides, tilt toward
engine and lift off of tractor.
o To replace, reverse above procedure..
HOOD
HEADLIGHT
_ WIRE
CONNECTION
FIG. 34
25