Filter
Top Products
H. STORAGE
When your ,saw is to be stored for over 30 days 3.
always: 4.
5.
1,
.
Drain fuel tank in asafe manner (see Impor-
tant Points, page9.)
Start Engine and allow to run at an idle
speed until the engine stops,
NOTE: This will remove most of the fuel from
the fuel system.
[CAUTION:]Wear-- protective gloves when han-
dling thechain. The chain is sharp and can
cut you even when it is not moving.
.
.
8.
Drain oil i_nk.
Remove, Clean, and dry the bar and chain.
Store the Chain in a container filled with oil
to prevent rust.
Apply a coating of oil to the entire surface of
the bar and wrap it in heavy paper, cloth or
plastic.
Clean the outside surfaces of the engine.
Store the saw in a dryplace, out of the reach
of children and away from wherefuet vapors
can reach open flames from hot water
heaters, furnaces, etc.
!. MAINTENANCE ACCESSORIES
1
2
___---3
Key
No.
1
2
Pad
No.
55046
Part
NO.
30073
30114
44209
44246
51262
51241
Catalog No. Description
-71-36565 File Guide
71-36524 Fi!e-5/32" dia.-Twin Pack
71-36526 _File-7/32" dia:-Twin'Pack
71-36557 Depth Gauge Tool
Catalog No. Description
71-36407
71-36711
71-36627
71-36555
71-36554
71-36556
71-36370
71-36867
71-3639
Spark Plug-Champion CJ-8Y
Replacement Recoil Cord
Carrying Case-
2-Cycle Engine Oil
Bar and Chain Lubricant (gallon size)
Bar and Chain Lubricant (quart size)
Lo-Kick® Guide Bar- 18"- 358.356100
Lo-Kick® Guide Bar- 20" - 358.356090
Xtra GUARD ®Chain- Oregon® (72SG -70) - 358.356090
(requires 7/32"dia. file)
Power Sharp® Chain - Oregon ®(76 TS-66), 358.356100
(includes Stone Cartridge Assy.)
24