Seagate ST3146707LW/LC Brush Cutter User Manual


 
Cheetah 10K.7 SCSI Product Manual, Rev. D 79
Notes [ ]: See page following this table.
NC [10] 37 77 ACTIVE LED OUT [4] [9]
RMT_START [5] [9] [12] 38 78 DLYD_START [6] [9] [12]
SCSI ID (0) [7] [9] [12] 39 79 SCSI ID (1) [7] [9] [12]
SCSI ID (2) [7] [9] [12] 40 80 SCSI ID (3) [7] [9] [12]
Table 17: LC 80-pin single-ended (LVD) I/O connector pin assignments [11] (Continued)
Note. A minus sign preceding a signal name indicates that signal is active low.
Signal name [1]
Connector contact
number [3] Signal number [3] Contact name[1]